Trigger Systems Emerald Sump - 34 inch - Online Only

Regular price $439.99

Shipping calculated at checkout.
WE DO NOT SHIP GLASS ITEMS, ROCKS, SAND OR FISH. THESE MUST BE PICKED UP IN STORE OR CHOSE LOCAL DELIVERY WITHIN 20 MILES of MERIDIAN, MS.
Trigger Systems specializes in aquarium sump manufacturing and are based here in the USA (Dallas, TX). All Trigger sumps come with a full top support brace which is made of a solid piece of material to prevent bowing over time from the humidity and water pressure. They also round the corners instead of squaring them which exponentially increases the strength of the corners.

Features
  • Interchangeable plates
  • Lid to prevent splashing
  • Adjustable water height
  • Self-adjusting foam block platform
  • Dual platforms
  • Protein skimmer section
  • Refugium section
  • Emerald green coloring to block light and prevent unwanted algae growth in other sections
Interchangeable Plates - Patent Pending
Each Emerald sump comes with two plates that can be placed into Section 1:
  • Filter Sock Plate
  • Foam Block Plate
The filter sock plate is installed when the included 100 micron filter socks are desired.

The foam block plate is perforated with holes and comes with a foam sponge block filter. The foam block plate can be used when filter socks are not desired or in the case when the filter socks need to be changed or cleaned but replacements socks are not readily available but yet mechanical filtration is needed. In this case, simply remove the filter sock plate and install the perforated foam block plate and then place the included foam sponge block filter in place.

Adjustable Water Level
Water level in the sump is adjustable from 7” to 9.5” to accommodate for the water height requirements for different protein skimmers.

Self Adjusting Foam Block - Patent Pending
As the water level is adjusted by sliding the wall up and down, the foam block sponge filter and the perforated plate that it sits on will also move up and down automatically. This is important to maintain the correct location of the foam block sponge filter with respect to the sump water height.

Probe Holder
All Emerald sumps come with a probe holder that can hold up to three probes. The two outside holes are 0.63” in diameter and the center hole is 0.8” in diameter to fit different sized probes.

Hose Holder
All Emerald sumps also come with 4 holes in the top support brace for holding in place 1/4” OD tubing from reactors, dosing pumps, ATO, etc.

Specifications
  • Dimensions: 34" long x 15" wide x 15" high
  • Drain Input Fittings: 2
  • Mechanical Filter: 2 x 4" filter sock and/or foam block
  • Skimmer Section: 10" x 14"
  • Center/Refugium Section: 10.25" x 14.5"
  • Return Pump Section: 6" x 14.5"
  • Total Water Volume: 31 gallons
  • Skimmer Water Level: 7" - 9.5" adjustable
Model Dimensions Skimmer
Section
Refugium
Section
Return
Section
Total
Volume
Skimmer
Water Level
Emerald 26 26x13x15 8.25x10 7.75x12.5 5x12.5 20.4G 7”-9.5”
Emerald 34 34x15x15 10x14 10.25x14.5 6x14.5 31G 7”-9.5”
Emerald 39 39x16x15 14x15.5 10.5x15.5 6x15.5 40G 7"-9.5"
Emerald 20C 20x20x15 11.625x9 19.5x6 13.25x7.625 24.3G 7”-9.5”